• Canna Blog

CannaSaver Blog

How to Make Cannabis Infused Lip Balm

Posted by CANNASaver on Friday, 22 September 2017 in Canna Blog

How to Make Marijuana Infused Lip Balm in 5 Easy Steps

Homemade marijuana lip balm is easy to make, and the possibilities are endless. A simple coconut oil and marijuana tincture is all you need to create a basic homemade cannabis lip balm that can be transformed in infinite ways by adding additional herbs and oils. If you’re wondering how to make your own marijuana tincture or homemade marijuana lip balm, here is a basic recipe for a thc-infused marijuana tincture that serves as an excellent ointment for keeping your lips soft and moisturized. You only need a few basic ingredients and no special equipment is necessary.

Step 1: Get some coconut oil. Coconut oil is rich in fatty acids which bind to the cannabinoids. It also stays solid at room temperature, which makes gives it the perfect consistency for a marijuana lip balm or tincture without having to add additional ingredients to thicken the product. You can get pure coconut oil at most grocery stores or health food stores.

Step 2: Get some marijuana. You’ll need some cannabis to infuse into the coconut oil, obviously, and you’ll need a fairly good quantity of it, like at least a quarter but more if you can get it. Flowers are preferable although leaves and trim aren’t entirely worthless, so you can include them if you have some. To make marijuana tincture lip balm, you will need equal parts cannabis and coconut oil. A cup of each is a good starting place. The shake ounce deals you can get from local dispensaries are perfect for making marijuana tinctures, since you’ll need to break up the weed anyway so it will actually save you time. As an additional plus, shake is cheap! You can get a deal on a shake ounce at Nature’s Best Glendale dispensary near Cherry Creek for instance for just $50, which is about half the price of the very cheapest ounce deals on buds in Denver that can typically be found.

Step 3: Break up the cannabis flowers into small pieces. You want to break it up to the consistency you would if you were rolling a joint, maybe a little less. If you break it up too much, you will get too much raw plant matter in your final product, but if you don’t break it up enough, the cannabis extracts won’t infuse into the coconut oil as much as it should. If you don’t want to have to do all that extra work, just pick up a shake ounce for under $100 and skip this step entirely.

Step 4: Put the marijuana and the coconut oil into a heavy saucepan, and heat on a low, slow simmer for a couple of hours. You want to heat the oil and cannabis just enough that the compounds in the marijuana can infuse into the oils, but not so much that it all gets burned away before you get to enjoy it. If you can’t smell it cooking once it warms up, you need to turn the heat up a bit until you can detect an odor. Err on the side of less heat rather than more heat.You can always heat it more, but you can never heat it less once the damage is done. About two hours at 230 degrees Fahrenheit is enough to do the trick. Be careful to not let the temperature get above 245 degrees. Lift the pan off the heat every so often if you need to keep the temperature from getting too hot.

Step 5: Once it’s ready, let it cool for just a few minutes then carefully pour the oil through a strainer or cheesecloth and into a clean, dry glass jar. Let it cool completely until it solidifies, and your marijuana tincture is ready. Scoop into smaller containers to create pocket-sized lip balms. Old fashioned pill boxes work well. Store the bulk of the marijuana tincture in the sealed glass jar and keep it in the refrigerator. Refrigerated, the cannabis tincture will last at least two months.

If it seems like too much trouble to make your own homemade cannabis tinctures and marijuana lip balms, you can always just leave it to the pros and pick up some ready-made marijuana topicals from a dispensary near you!

Countinue Reading
How to Strain Cannabutter Without Cheesecloth

How to Strain Cannabutter Without Cheesecloth

Posted by CANNASaver on Saturday, 02 January 2021 in

In Colorado, cannabis is pretty easy to find these days. However, when you’re trying to be adventurous with your cannabis and make some homemade edibles and goodies, you don’t always have all the equipment you need for cooking. Have no fear, here’s how to strain cannabutter without cheesecloth.

diy cannabutter

What is Weed Butter?

Also known as marijuana butter or cannabutter, weed butter is a combination of cannabis and butter. Weed butter is most commonly used to make cannabis edibles. These include cannabis cookies and brownies.

Why is Straining Required?

Once it is infused, cannabutter needs to be strained. This is often done by slowly and carefully allowing the product to seep through cheesecloth. This method allows only the oil to get through the filter.

You don’t have to strain your cannabutter. You can take the plant bits out of the cannabutter using a slotted spoon. However, you will have to be content with plant pieces floating around in your weed butter.

Straining is required to ensure that the product with which you are going to bake doesn’t contain excess plant materials.

Problems with Using Cheesecloth for Straining

Cheesecloth is gauze-like, woven cotton cloth. It was originally used to create and wrap cheese. Hence, its name. Cheesecloth is costly and can be used only once.

Cheesecloth is tricky to cut. It is also messy and time-consuming to use as a strainer. If you squeeze the cheesecloth to hurry the process, you can end up with plant materials in the cannabutter.

A final disadvantage is that most households don’t have cheesecloth on hand. It is not always easy to find. You can buy cheesecloth at a kitchen supply store or a fabric store by the yard but you need to cut it to the size you need for your strainer.

how to strain cannabutter without cheesecloth

Alternatives to Straining with Cheesecloth

  1. Try Muslin

Select 100% cotton, unbleached, lightweight muslin. The cheaper the quality of the muslin the better it is for straining. You want a loose weave. This will provide a strainer that is tighter than cheesecloth and much cheaper. Muslin is also easier to find and to cut than cheesecloth.

Place the muslin over the mouth of a bowl, a cup, or a measuring cup. Secure with a device like an elastic band or clips. Place the cannabis leaves or buds in the muslin. Pour hot butter over the cannabis and allow it to strain into the receptacle below.

  1. Consider Found Materials

You don’t have to go out and purchase cheesecloth or muslin. Look around you. Straining materials are there. How about using a pillowcase, a tea towel, a bandana, or a scrap of fabric from your craft basket?

Stretch the material over the mouth of a bowl. Hold in place with an elastic band or clips around the rim. Put the cannabis in the material and pour hot butter over the material. Allow to strain. 

When done, discard the cannabis. The fabric can be washed and reused.

  1. Create an Herb Bag

Use found material to create a pouch. Place the cannabis materials inside and sew closed. Place this bag in a bowl of warmed butter. Allow the cannabis to infuse the butter, stirring from time to time. 

When the butter is infused to your liking, take the bag out and discard it. You can make several of these bags while you have your sewing machine out. Store in a closed, dry container until they are needed.

  1. Coffee Filters Work

You have them on hand. Coffee filters make good strainers for cannabutter because they are already set up to be used to filter materials and infuse the liquid. 

First, run hot water through the filter to remove the paper taste. Place the filter in a mug, a bowl, or a dish. Put the cannabis buds or leaves in the filter. Then, pour heated butter in a circular motion over the cannabis and allow the mixture to brew.

Once the butter is infused, remove the filter with the cannabis inside and discard it. You’re left with delicious cannabutter for cooking.

  1. Cloth Table Napkins are Versatile

Those cotton table napkins or cloth diapers can also serve as filters. Stretch the material over the mouth of a bowl. Hold in place with an elastic band or clips around the rim. Put the cannabis in the material and pour hot butter over the material. Allow to strain. 

When done, discard the cannabis. The fabric can be washed and reused.

  1. Look for a Fine Mesh Bag

Fine mesh bags can be purchased in a hardware store. Mesh bags are worth the price because they are easy to clean and can be reused.

Put the cannabis in the mesh bag. Pour hot butter over the bag. Allow to strain. 

When done, discard the cannabis. The mesh bag can be washed and reused.

  1. Select a Fine Wire Sieve

A wire sieve is easy to clean. It can be used several times. Be sure to choose a sieve that catches the plant materials. Because it is reusable, a wire sieve is an inexpensive strainer. Moreover, it is easy to use and not messy.

  1. Repurpose Pantyhose

Stockings or pantyhose are a good substitute for cheesecloth. Simply stretch a clean pair of pantyhose or tights or a nylon stocking over the mouth of a large mixing bowl. When you have finished straining the cannabutter, toss the pantyhose in the washing machine and reuse it.

  1. Use the Two-Cup Method

Originally used to brew tea, this also works for cannabutter. Place cannabis in a cup. Pour hot butter over top. Stir until the butter is fully infused. Then pour the mixture into a strainer over a second cup. Discard the plant pieces remaining in the sieve.

If you don’t have a strainer, you can pour the mixture in the first cup into the second cup using a slotted spoon to catch the plant pieces.

If you don’t have a slotted spoon, use a fork to hold back the plant material as you pour the infused butter from the first cup into the second one.

  1.  Create a Tin Foil Infuser

Cut out a square of tin foil large enough to cover the surface of a cup. 

Fold the square twice so you have a small square. Use a sharp paring knife to make holes in the closed corner.

Fold out a pocket and place it in the cup. Put in the cannabis material. Pour in hot butter. Allow mixture to brew, stirring occasionally. When the butter is infused, remove the tin foil infuser with the plant material and discard it.

how to make cannabutter

** Don’t Use a Paper Towel

People often make the mistake of assuming a paper towel will work as effectively as a filter when they are considering how to strain cannabutter without cheesecloth.

Avoid using paper towels as strainers. Paper towel production uses bleaches and other chemicals. When you strain the butter through a paper towel, it leaches these chemicals into the cannabutter. 

And that's how to strain cannabutter without cheesecloth.

Countinue Reading
How To Make Cannabutter With A Coffee Maker

How To Make Cannabutter With A Coffee Maker

Posted by CANNASaver on Saturday, 12 December 2020 in

What is Cannabutter?

Often referred to as marijuana butter or weed butter, cannabutter is used to create cannabis edibles like brownies and cookies.

Creating your own cannabis-infused edibles at home can be messy and time-consuming. If you wish to enjoy cannabis treats without the work, browse the great deals on prepared edibles.

How To Make Cannabutter With a Coffee Maker

How is Cannabutter Made?

Many sites like Healthyish.com and Bonappetite.com offer step-by-step instructions to novice cannabis cooks to create cannabutter.

Cannabutter Proportions

As you become more experienced, you can experiment with how much weed and butter to use. For beginners, a good starting point is four sticks (one pound) of butter for every ounce of marijuana. Try a half-ounce of weed and two sticks of butter. 

There are various ways to strain the product. A simple guide suggests creating cannabutter by following these steps:

  1. Decarboxylation

Also known as decarbing, drying, or desiccating, this step involves baking or dehydrating the weed. The process activates THC, CBC, and other cannabinoids. When this step is completed, the lipids in the butter can bind with the weed.

For proper decarboxylation:

  • Preheat the oven to 200 degrees F. 

  • Take a half-ounce of weed and grind gently with a hand grinder or snip with scissors. 

  • The finished product should be just fine enough for making a joint.

  • Spread plant material on a glass baking dish. Place the dish on the center oven rack.

  • If the weed is old or of lower quality, bake for twenty minutes. If it is a higher quality weed or cured weed, bake for forty-five minutes.

  • Stir gently every ten minutes to prevent burning.

  • The marijuana should change from bright to deep brownish-green.

If you want to streamline the process of making cannabutter, you can buy plant materials ready for infusion. Check out our cannabis products or already vaped material deals.

  1. How to Make Cannabutter with a Coffee Maker

The next step involves infusing the butter with marijuana. A common technique uses a large pot containing marijuana, water, and melted butter. Put this on the stove on medium heat for ten minutes or so. Then, the plant material has to be separated from the water and melted butter.

Unfortunately, the straining process often results in spatters, filter accidents, and singed fingers while trying to get the emulsion through the strainer material.

Also, sadly, the precious cannabutter can get stuck in the cheesecloth or other filter material while it cools and solidifies. This wastes valuable cannabutter. 

These disappointing experiences often cause would-be cannabutter makers to abandon the project and simply buy their edibles.

A tidier, safer alternative is the coffee maker. You can use a regular coffee maker. Place the plant material in the coffee filter. Pour the butter/water mixture through the top and wait for the liquid to pass through the coffee-making process and into a Pyrex measuring cup below.

However, an espresso pot or a Mota Pot is more effective.

cannabutter with a coffee maker

Follow these steps to use a simple espresso machine or a Mota Pot to create quality cannabutter without the muss and fuss of those kitchen accidents.

  • First, unscrew the top of your espresso pot.

  • Remove the middle chamber.

  • Place a stick of diced butter in the bottom chamber.

  • Fill the bottom chamber halfway or a little more with water.

  • Weigh out decarbed weed you’ve dried yourself or try a $50 ounce of “shake.” 

  • Place this in the middle filter chamber where coffee grounds would be placed.

  • Screw the top of the espresso pot back on.

  • Place the espresso pot on medium heat on the stove for at least ten minutes or more.

  • Don’t use higher heat. You will burn the butter.

  • Listen for the burping sound as the butter/water passes up through the weed in the middle chamber.

  • It will bubble into the top chamber. Make sure all the juice has spurted into the upper chamber. 

  • Pour this liquid into a Pyrex measuring cup.

  • Place in the fridge to cool. This will allow the butter and water to separate. This will take approximately an hour.

  • Use a butter knife to poke the edges so you can pry the solidified butter out of the measuring cup.

Using a Mota Pot is much the same process as with an espresso pot. Simply place the Mota Pot on the stove on medium heat with a stick of butter and a cup of water in the bottom. The water in the lower section heats and turns to steam. The hot steam forces the melted butter up through the filter containing the herb, infusing the butter with the THC.

The hot liquid is then poured into a Pyrex dish and cooled in the same manner used in the coffee maker or the espresso coffee maker. Click here for a step-by-step Mota Pot demonstration.

Why Strain Cannabutter? 

There is no rule that you must strain cannabutter. You can scoop the plant remains from the butter/water mixture using a fork, a slotted spoon, cheesecloth, or a metal sieve. Depending on the edible, some plant material may not detract from the weed butter. 

Using the coffee maker or Mota Pot method, the filter area of your coffee maker, espresso maker, or Mota Pot builds in this straining method.

DIY cannabutter with coffee maker

How to Use Weed Butter

You can add weed butter to many recipes. You are limited only by your imagination. Use the cannabutter as part of the butter or oil specified by the recipe. For example, you can use a tablespoon of cannabutter and three tablespoons of non-weed oil or butter.

Follow these steps to make a good cannabis vinaigrette salad dressing. 

Fix nutritious soups by spiking the liquid with two tablespoons of cannabutter or canna-infused sesame oil.

Try these cannabis-infused Citrus Caramel Blondies

Are you in the mood for homemade hot-from-the-oven marijuana cookies? Try this simple recipe.

My favorites are still chocolate cannabis brownies

If you have decided you’d rather buy your edibles already prepared, indulge in Chaos Crispies or get a great deal on ANY “N-fuzed” gummies.

For other ways to make cannabutter, visit our blog!

Countinue Reading

Deals Near You

8 grams of Shatter/Wax $120 OTD
8 grams of Shatter/Wax $120 OTD
Commerce City - Recreational
5 Joints $15 OTD
5 Joints $15 OTD
Commerce City - Recreational
4 WYLD 100MG GUMMIE PACKS $59.33
4 WYLD 100MG GUMMIE PACKS $59.33
Denver - Recreational
NFUZED (4) 100mg Gummies $24.99
NFUZED (4) 100mg Gummies $24.99
Denver - Recreational
4g of Concentrates $37.99
4g of Concentrates $37.99
Denver - Recreational
Buy 1 Edible Get the 2nd for Half-Off
Buy 1 Edible Get the 2nd for Half-Off
Colorado Springs - Medical
REC - BOGO 50% off ALL Cartridges
REC - BOGO 50% off ALL Cartridges
Denver - Recreational

Archive